Hitachi GR2000-B Series - Manual (Page 39)

Basic Operations
GR2K-GA-0008 3-5
Rev. 1.00
3.3.6 Check the Configuration You Set by Displaying its Information
3.3.7 Save the Configuration Information Into the Configuration File
3.3.8 Close the Configuration File
3.3.9 Return to the Administrator Mode
*
Note: Although you can skip this operation, check if the configuration information
edited is correct to avoid the trouble at the time the GR2000-B starts running.
For the display style, refer the examples of each command execution.
*
Note: The configuration information is saved into the file currently opened in case that
you skip inputting a file name. Therefore, in this example, the information is
saved into the operative configuration file on memory. You can save the
information into any preparative configuration file designated by inputting a file
name.
FRQILJ VKRZ
OLQH /$1 HWKHUQHW
OLQH /$1 HWKHUQHW
LS /$1 ^
`
LS /$1 ^
`
VWDWLF ^
GHIDXOW JDWHZD\
`
FRQILJ
The configuration information is
displayed by the show command.
The information displayed
as a result.
The "(config)#" prompt is shown
after the information is displayed.
FRQILJ VDYH
FRQILJ
The edited configuration information is saved into the configuration
file you are working on using the save command.
The ! prompt is deleted after the configuration information is saved.
FRQILJ FORVH
FRQILJ
The configuration file being edited is closed by the close command.
FRQILJ H[LW
The edit is finished using the exit command, and the
system returns to the administrator mode (# prompt).