Honeywell HD-16DVR-C - Manual (Page 130)

Web Client Operation
114
Figure 6-31 Date and Time Setup Menu
Please refer to the following sheet for detailed information.
Parameter Function
Channel Please select a channel first.
Pre-record
Please input pre-record value here.
System can record three to five seconds of video before
activating the record operation in the file. (Depends on data
size.)
Setup
In Figure 6-30 , click Set, and you can go to the
corresponding setup interface.
Please set schedule period and then select corresponding
record or snapshot type: schedule motion detection and
alarm.
Please select date (Current setup applies to current day by
default. You can select the circle before the week to apply
the setup to the whole week.)
After setup is complete, please go back to
Figure 6-30 and
then click Save to save the current time period setup.
Copy
It is a shortcut menu button. You can copy current channel
setup to one or more (all) channels. The interface is shown
as in
Figure 6-29 .
Save
You can click Save after you complete setup for one
channel, or you can complete the whole setups and then