HP PhotoSmart 812 - Manual (Page 66)

66 hp photosmart 812 user’s manual
Cannot display
image
Possibly comes
from copying
images to the
card from a
computer or a
corrupted
image caused
by the camera
not shutting
down properly.
Use the HP software to
edit the images copied
on the card. Also, do not
remove batteries or the
memory card when the
camera is turned on.
Unable to
communicate with
the printer
There is no
connection
between the
camera and
printer.
Make sure the cables are
connected between the
camera or camera dock
and the printer. If that
does not work, turn off
the camera and
disconnect it. Turn the
printer off and then on
again. Re-connect the
camera and turn it on.
A supported
printer is either
turned off or not
connected to
the camera.
Make sure the camera is
connected to a supported
printer and that the
printer is turned on.
Message Possible cause Solution