HP PhotoSmart 812 - Manual (Page 61)

7-Troubleshooting 61
My image is
too bright.
The flash
provided too
much light.
Change the flash setting to
Flash Off.
A natural or
artificial
source other
than the flash
provided too
much light.
Try taking the picture from a
different angle. Avoid pointing
the camera directly toward a
bright light or reflective surface
on a sunny day. If there is light
behind your subject, use the
Flash On.
You were too
close to the
subject to use
the flash.
Move back from the subject or
set the flash to Flash Off and
take the picture again.
Problem Possible cause Solution