HP PhotoSmart 812 - Manual (Page 45)

5-Connecting 45
The camera dock has a light near
the top front that provides battery
charging status. A blinking light
indicates that batteries are charging.
There are two buttons on the front
that light to show that the camera is
connected to the associated device.
z
—This button activates the
connection to the computer or the printer, depending on
which of those devices is connected to the dock.
z
—This button activates the television connection.
The functions of the dock button lights are described below:
State Indication
On Camera dock has power and a device is
connected. When you press a button for one
device, the other button device light goes out.
Blinking The selected device is active.
Off
z
The device selected is not connected to the
camera dock.
z
The device selected is not available because the
other device is active.
z
Camera dock has no power or there is no
camera connected.