HP PhotoSmart 812 - Manual (Page 53)

6-Adjusting camera settings 53
Changing the TV configuration
setting
This selection sets the format of the
video signal for displaying camera
images on a television with an
optional cable or HP camera dock.
1 Select TV Configuration in the
Setup menu. The TV
Configuration screen appears.
2 Using the Up/Down arrows, make one of the following two
choices and then press OK.
• NTSC — used primarily in North America and Japan
• PAL — used primarily in Europe
For more information on connecting the camera to a TV, refer
to Chapter 5.
Changing the language
This selection sets the language of
the menus and text on the camera
Display.
1 Select Language in the Setup
menu. The Language screen
appears.
2 Using the Up/Down arrows,
select a language and then press OK.
Exiting setup
Selecting EXIT SETUP takes you back to the Main menu.