HP PhotoSmart 812 - Manual (Page 47)

5-Connecting 47
Displaying images on a TV using the
dock
1 Check that the HP camera dock is connected to your TV.
2 Refer to the documentation for your television to determine
how to set the television to take video input from your
camera instead of the antenna or cable.
3 On the camera, check that the TV Configuration setting in
the Setup menu is set for your area. See “Changing the TV
configuration setting” on page 53.
4 Place the camera in the dock. It will turn on automatically.
5 Press the button on the dock to start displaying images.
The camera starts a slide show of each image, playing any
attached audio clip or video clip, and then fading to the
next image. You can also manually scroll through the
images by pressing the Left/Right arrows on the camera
NOTE The Display on the camera turns off when the camera
is connected to a TV.
NOTE You can still use the Main and Share menus
while connected to the television.