HP PhotoSmart 812 - Manual (Page 15)

1-Getting started 15
Setup
Attaching the wrist strap
Attach the wrist strap as shown in
the illustration.
NOTE It is easiest to install the
wrist strap by inserting it from
the bottom.
Installing the batteries
1 Open the Battery Door on the
bottom of the camera.
2 Insert the batteries according to
the markings on the metal
contacts located on the door.
Installing the memory card
1 With the camera off, open the
Memory Card Door by sliding it in
the direction of the arrow.
2 Insert the memory card.
3 Close and ensure that the Memory
Card Door is latched.
To eject the card, make sure the
camera is off, and then push the card in to spring it from the
camera.