Hitachi 9900 V Series - Manual (Page 54)

PRELIMINARY RELEASE
42 Chapter 4 Virtual LVI/LUN Operations
9. You will be returned to the VLL tab. The change is not yet implemented in the
subsystem, but the following changes will appear in the VLL tab:
a) The figures in the Capacity column will not yet be updated.
b) The color of the CU icon that you manipulated in the Parity Group - LDEV outline
view changes from red to yellow. You cannot manipulate yellow CUs until you select
the Apply button or the Cancel button (see below), but you can initialize additional
VLL volumes in CUs with red icons.
10. If you want to apply the changes to the subsystem, select Apply and then select OK on
the confirmation message (refer to Figure 3.6). Note: When LDEV formatting is in
progress, a panel appears and indicates the progress.
11. If you want to cancel the changes and not apply them to the subsystem, select Cancel
and then select OK on the confirmation message (refer to Figure 3.7).
Figure 4.13 Volume Initialize Pop-Up Menu