To disable or enable the sleep mode feature, Display brightness feature, To set the display brightness feature – HP 3800 User Manual
Page 51: Personality feature, To set the personality feature
To disable or enable the Sleep Mode feature
1.
Press
Menu
.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight RESETS, and then press .
4.
Press
to highlight SLEEP MODE, and then press .
5.
Press
or
to select ON or OFF, and then press to set the selection.
6.
Press
Menu
to return to the Ready state.
Display Brightness feature
Change the brightness of the control-panel display by using the DISPLAY BRIGHTNESS option.
To set the Display Brightness feature
1.
Press
Menu
.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight SYSTEM SETUP, and then press .
4.
Press
to highlight DISPLAY BRIGHTNESS, and then press .
5.
Press
or
to select the appropriate setting, and then press to set the selection.
6.
Press
Menu
to return to the Ready state.
Personality feature
NOTE
This feature is available for the HP Color LaserJet 3000 and 3800 Series printers only.
This printer features automatic personality (printer language) switching.
●
AUTO: Configures the printer to automatically detect the type of print job and configure its
personality to accommodate that job.
●
PCL: Configures the printer to use Printer Control Language.
●
PDF: Configures the printer to use portable document format.
●
PS: Configures the printer to use PostScript emulation.
To set the Personality feature
1.
Press
Menu
.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight SYSTEM SETUP, and then press .
4.
Press
to highlight PERSONALITY, and then press .
ENWW
Changing printer control-panel configuration settings
37