Bosch 800 Series 30 Inch Double Speed Combination Smart Electric Wall Oven Owners Manual - Manual (Page 18)

18
4. To change the value for the displayed setting, press
the Enter button to enter the edit mode. Use the
numeric keypad to change the setting value. The
corresponding setting value is shown in the table
following.
For the temperature offset, with the item in edit mode,
press “-” or “+” first, then the numeric offset value.
The new value is automatically accepted as the display
reverts from edit mode back to display mode.
To exit the Settings menu:
Press the Oven Clear/Off button.
Oven Temperature Offset
The oven is calibrated to provide accurate results. This
feature is useful if you prefer your foods lighter or darker.
When an offset temperature is selected, the actual oven
temperature is raised or lowered by this value.
Do not use residential oven thermometers to evaluate
oven temperatures as they will fluctuate throughout
cooking.
The oven must be turned off in order to set an offset
value. Refer to Temperature Offset in Settings Menu
Options for setting.
Note: This process can be repeated until a satisfactory
result is achieved. Each time these steps are repeated,
the oven temperature sets to zero. In other words, if the
offset was changed by 5° the first time, the second time
it will need to be offset by 10°. The oven will not add to
the original offset.
Settings Menu Options
Menu Item Description Default
1 Temperature
Mode
Fahrenheit (°F) or
Celsius (°C) °F
2 Brightness High, Medium, Low High
3 Volume High, Medium, Low High
4 Clock Mode 12-hour or 24-hour display
mode. 12HR, 24HR
12HR
5 Auto
Convection
Conversion Decreases oven tempera-
ture by 25°F for Convec-
tion Bake and Convection
Multi-Rack cooking
modes. On, Off
OFF
6 Button Beep Tone when button is
pressed. ON, OFF
ON
7 Standby
Clock
Display Clock displays when no
cooking mode or timer is
in use. ON, OFF
ON
8 Language Language setting: English
(EN), French (FR)
EN
9 Temperature
Offset Sets the temperature off-
set value for Bake, Con-
vection Bake, Roast,
Convection Roast and
Convection Multi-Rack.
Temperature offsets must
always be entered as
2 digits. Example: 5°is
entered as 05.
When an offset value is
entered, the actual oven
temperature is increased
or decreased by this
value. This feature is use-
ful if food is either too
brown or too light.
The range for changing
the offset is between +/-
35°F (+/- 19°C) in 1°
increments.
0
10 Home
Connect
See Home Connect
chapter.