Bosch 800 Series 30 Inch Double Speed Combination Smart Electric Wall Oven Owners Manual - Manual (Page 17)

17
Setting the Sabbath Mode
No kitchen timers or oven timers may be running when
Sabbath Mode is entered.
1. Begin a Bake operation.
2. Press and hold the Oven Timer button for 5 seconds.
The message:”SABBATH NOT AVAILABLE” is
displayed if a timer is running or the set temperature is
outside the allowable range.
If no timers are running, the Sabbath Mode settings
appear in the display. The Sabbath Mode timer blinks
showing the value can be edited. The default value is
74:00 (the maximum number of hours for which
Sabbath Mode can be set).
3. Press Enter to accept the default 74:00 hours and
start Sabbath Mode or use the numeric keypad to
enter the desired Sabbath Mode timer value. Timer
values between 0:01 and 74:00 can be entered.
Note: If no changes are made within 10 seconds,
Sabbath Mode auto starts.
4. Once Sabbath Mode has begun, the display changes
to show the message “SABBATH ON”.
5. After the Sabbath Mode countdown reaches zero, the
oven displays the current time and the message
“SABBATH”. No changes can be made at this point.
To end the Sabbath Mode and return to normal
function, press the Oven Clear/Off button.
Editing the Sabbath Temperature
While editing the temperature in Sabbath Mode there is
no feedback from the control. If an invalid temperature is
set, the oven will default back to the previous running
temperature.
1. Press the Bake button.
2. Enter the new desired set temperature.
3. Press Enter .
The oven will adjust its set temperature after randomized
delay.
Panel Lock
Allows the user to disable all buttons on the control
panel. Panel Lock can only be enabled in Standby mode.
1. To enable Panel Lock, press and hold the Panel Lock
button for 3 seconds (in Standby mode).
2. To disable Panel Lock, press and hold the Panel Lock
button for 3 seconds. The display returns to Standby
mode.
Settings
The oven setup menu is used to customize certain oven
settings.
The oven must be in Standby mode (no cooking mode or
timer running) in order to access the setup menu.
To make changes to Settings menu items:
1. Press the Settings button.
2. The fist setup item is displayed. The display shows
“SET CLOCK”. Press Settings again to access the
settings menu.
3. To display a different setup item, press the number
corresponding to that setting (see table following or
press the Settings button to cycle through available
options).