beautypg.com

Set the cooking mode and temperature, Note, Notes – Bosch 800 Series 30 Inch Double Speed Combination Smart Electric Wall Oven Owners Manual User Manual

Page 16: Sabbath mode

background image

16

To use the probe:

1.

Insert the probe into the meat as described above. The

probe symbol is displayed.

2.

Connect the probe to the oven. If the probe is not

connected to the oven prior to starting Probe mode, an

error tone sounds and the message “INSERT PROBE”

is displayed.

3.

Set the cooking mode and temperature.

4.

The Set Probe Temp screen is displayed. A three digit

input prompt “- - -” blinks in the lower right corner. Use

the numeric keypad to enter the desire probe

temperature and press

Enter

.

Note:

The minimum probe temperature that can be

set is 100°F (40°C) and the maximum is 200°F

(100°C). If the probe temperature entered is outside

this range, an error is displayed.

5.

The probe current temperature and target temperature

are both displayed in the format “105/180” at the

lower right corner of the display. The actual

temperature will display <80

 

until the food temperature

reaches 80°F.

The displayed probe temperature is updated in

increments of 5° during the cooking process.

6.

When the probe temperature reaches the set

temperature, the cooking mode turns off. The current

time is displayed and the message “COOKING

COMPLETE” blinks at the bottom left of the display. An

alarm tone sounds every 10

 

seconds for 2

 

minutes.

This screen remains in the display until it is cleared by

pressing the

Oven Clear/Off

button or until the probe

is removed. The display then goes back to Standby

mode.

Notes

Probe is not available when an Oven Timer has

been set.

To change the probe temperature, press the Probe

button. The display enters probe temperature

editing mode and displays the message “SET

PROBE TEMP”. Enter the new probe temperature

and press

Enter

to accept the new value.

Do not store the probe in the oven.

Always use the handle of the probe for inserting and

removing.

Always use a potholder to remove the probe since it

becomes hot.

Since meat continues to cook after being removed

from the oven, set the internal (probe) temperature

5°-10° below the desired final internal temperature

except with poultry.

Sabbath Mode

The Sabbath Mode enables those of particular faiths to

use their ovens on the Sabbath.
The Sabbath Mode can be entered in a Bake mode only.
If the oven light is on at the start of Sabbath Mode, it

remains on throughout the Sabbath Mode operation. If

the oven light is off at the start of Sabbath Mode, it

remains off throughout the Sabbath Mode operation.

Notes

The temperature range in Sabbath Mode is 100°F to

450°F.

The Sabbath Mode timer can be set between 0:01

 

and

74:00

 

hours.

This manual is related to the following products: