Eclipse - Fujitsu Ten CD5435 - Manual (Page 83)

83
How to use the remote control
Selecting a station (manually or automatically)
A short press of the button will allow manual station tuning. Pressing
for more than one second will start automatic tuning.
Press the [ TUNE•SEEK ] button.
[ ] button: Tunes to higher frequency stations.
[ ] button: Tunes to lower frequency stations.
Selecting preset stations
A total of six stations may be selected (preset tuning) out of those
already set in memory through the main unit. (Refer to "Manually
setting stations into memory" on page 68)
Press the [ PRESET CH ] button.
[ ] button: Select the next higher number preset button.
[ ] button: Select the next lower number preset button.
How to play CDs
Switching disc modes
Press the [DISC] button.
The disc mode is activated.
Press the [BAND] or [DISC] button.
When one or two CD changers are connected, press the
[BAND] or [DISC] button to change modes from CD player
➔
CD changer 1 ➔ CD changer 2.
The indicator will skip a changer or player that has no discs
loaded.
[BAND] button
[ PRESET CH ] buttons
[ TUNE · SEEK ] buttons
[DISC] button
CD5435.book 83 ページ ２００４年１２月１１日 土曜日 午後５時２９分