Eclipse - Fujitsu Ten CD5435 - Manual (Page 71)

71
How to operate the tuner
Changing the radio band location
The location for the radio bands used between the North American region
and the Asia/Australia/Latin region can be switched. The default setting is
USA (North America).
Check that the deck is in standby mode.
Press and hold button [3], then the [FM AM] button, and
hold both for more than three seconds.
in the order shown below
When an optional HD Radio tuner unit is connected, radio band
location is set to USA. Other radio band locations are unavailable.
(U.S.A. only)
[FM AM] button Button [3]
USA ASIA AUS LATIN
CD5435.book 71 ページ ２００４年１２月１１日 土曜日 午後５時２９分