Eclipse - Fujitsu Ten CD5435 User Manual
Page 68
68
How to operate the tuner
Manually setting stations into memory
This section covers the setting of stations in memory under the numbered
buttons.
Press the [FM AM] button for less than one second to
switch between FM and AM.
Turn the [SEL] button to the right or left to tune to the
station to be entered in memory.
Select any button, from [1] to [6], and press it for more
than two seconds.
The tuned station is now memorized and set in the button selected.
Repeat the procedure to set additional manually tuned stations in
memory, in turn, for buttons [1] to [6]. These buttons are called the
preset buttons.
If the vehicle’s battery is disconnected (for repairs to the vehicle or for
removing the receiver), all stations in memory will be lost. In such a
case, set stations in memory again.
[SEL] button
Buttons [1] to [6]
[FM AM] button
CD5435.book 68 ページ ２００４年１２月１１日 土曜日 午後５時２９分