Eclipse - Fujitsu Ten CD5435 User Manual
Page 102
102
How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only)
Manually setting channels into memory
This section covers the setting of channels in memory under the
numbered buttons.
Turn the [SEL] button to the right or left to tune to the
channel to be entered in memory.
Select any button, from [1] to [6], and press it for more
than two seconds.
The tuned channel is now memorized and set in the button
selected. Repeat the procedure to set additional manually tuned
channels in memory, in turn, for buttons [1] to [6]. These buttons
are called the preset buttons.
If the vehicle’s battery is disconnected (for repairs to the vehicle or for
removing the receiver), all channels in memory will be lost. In such a
case, set channels in memory again.
[SEL] button
Buttons [1] to [6]
CD5435.book 102 ページ ２００４年１２月１１日 土曜日 午後５時２９分