Eclipse - Fujitsu Ten CD5435 - Manual (Page 27)

27
Basic operation
Listening to the tuner
Press the [FM AM] button.
This will turn the tuner on.
Press the [FM AM] button for less than one second to
switch to the desired FM or AM bands.
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order
each time the button is pressed.
Turn the [SEL] button to the left or right to tune to a
station.
Turn to the right: Tunes to higher frequencies.
Turn to the left: Tunes to lower frequencies.
Press the [ ] or [ ] button to start the automatic station
search.
[ ] button: Starts searching toward higher frequencies.
[ ] button: Starts searching toward lower frequencies.
● If stations have been stored in memory, pressing a button from
[1] to [6] will directly select a station. (Refer to the section
"Manually setting stations into memory" on page 68)
● When an optional HD Radio tuner units is connected, digital
broadcasts have reception priority. (U.S.A. only)
Buttons [1] to [6] [FM AM] button [SEL] button [ ] button
[ ] button
CD5435.book 27 ページ ２００４年１２月１１日 土曜日 午後５時２９分