Eclipse - Fujitsu Ten CD5435 User Manual
Page 105
105
Others
Changing auxiliary input sensitivity
The sensitivity of the auxiliary mode can be changed.
Press the [FUNC] button for less than one second.
The function mode is activated.
Turn the [SEL] button to select AUX Sensitivity.
The selected item is highlighted.
Press the [SEL] button.
The AUX sensitivity mode is activated.
Turn the [SEL] button to select the sensitivity mode.
Turning the button allows you to toggle through sensitivity
modes as follows:
Press the [SEL] button.
The selected settings will take effect.
Press the [RTN] button.
At this time, other adjustments can also be made in function
mode.
Press the [FUNC] or [RTN] button to exit function
mode.
Input sensitivity modes are roughly as follows:
Low
1Vrms
Mid-Low
480mVrms
Mid
240mVrms
Hi
120mVrms
[FUNC] button [SEL] button
[RTN] button
Low
Mid-Low
Mid
Hi
CD5435.book 105 ページ 2004年12月11日 土曜日 午後5時29分