Fulgor Milano 30 Inch Over-the-Range Microwave Oven Use and Care Manual - Manual (Page 15)

EN
15
6 - CONTROLS
The COOK indicator lights and ENTER, TIME indicators
blink., “ : 0” is displayed.
The display will show what you pressed.
The display will show PL10 for 100% power.
The display will show PL-0 ~ PL10.
If you skip steps 3 and 4, 100% power is automatic.
When you press START pad, the COOK indicator starts
blinking to show the oven is cooking.
The display counts down the time to show how much
cooking time is left. When the cooking time ends, you
will hear 3 beeps.
NOTE:
• Your oven can be programmed for 99 minutes 99
seconds. (99:99)
• Using lower power levels increases the cooking time
which is recommended for foods such as cheese, milk
and slow cooking of meats.
Cooking in Two Stages
This feature lets you program two sequential operations such
as defrosting and cooking or cooking using two different
power levels. It automatically changes power settings and
cooking time.
Defrosting + Cooking
1. Press DEFROST pad once.
2. Press number pads for the desired
defrosting time.
3. Press TIME COOK pad.
4. Press number pads for the cooking
time.
5. Press POWER LEVEL pad.
6. Press number pads for power level
(0~10).
7. Press START pad.
The DEF indicator lights and ENTER, TIME indicators
blink, “ : 0” is displayed.
The display will show what you pressed.
The COOK indicator lights and ENTER, TIME indicators
blink., “ : 0” is displayed.
The display will show what you pressed.
The display will show PL10 for 100% power.
The display will show PL-0 ~ PL10.
If you skip steps 5 and 6, 100% power is automatic.
When you press the START pad, the DEF and COOK
indicators come on to confirm the power levels selected.
The DEF indicator starts blinking to show you that the
oven is in TIME DEFROST mode.
The display counts down the time remaining in TIME
DEFROST mode. When the oven beeps, turn over,
break apart and/or redistribute the food. At the end
of TIME DEFROST mode, the oven will beep and start
MICROWAVE cook.
The DEF indicator goes off and the COOK indicator starts
blinking. The display counts down the time remaining in
MICROWAVE mode. When MICROWAVE cook ends,
you will hear 3 beeps.
NOTE: Your oven can be programmed for 99 minutes
99 seconds. (99:99)
Cooking + Cooking
1. Press TIME COOK pad.
2. Press number pads for the cooking
time.
3. Press TIME COOK pad.
4. Press number pads for the cooking
time.
5. Press POWER LEVEL pad.
6. Press number pads for power level
(0~10).
7. Press START pad.
COOK indicator lights and ENTER, TIME indicators blink.
“ : 0” is displayed.
The display will show what you pressed.
The COOK indicator lights and ENTER, TIME indicators
blink., “ : 0” is displayed.
The display will show what you pressed.
The display will show PL10 for 100% power.
The display will show PL-0 ~ PL10.
If you skip steps 5 and 6, 100% power is automatic.
When you press the START pad, the COOK indicator
starts blinking to show the oven is in cook mode for
stage 1.
At the end of stage 1, the oven will beep and start stage 2.
The display counts down the time remaining in stage 2
mode. When stage 2 ends, you will hear 3 beeps.
NOTE: Your oven can be programmed for 99 minutes 99
seconds. (99:99)
1_TINSKB286MRR0_FULGOR _OTR_U&C_.indd 15 7/9/19 9:25 AM