Fulgor Milano 30 Inch Over-the-Range Microwave Oven Use and Care Manual - Manual (Page 13)

EN
13
6 - CONTROLS
How to Use to Delay the Start of Cooking
1. Press KITCHEN TIMER pad.
2. Press the amount of time you want
to delay.
3. Press TIME COOK pad to program
the desired cooking time for food to
be cooked.
4. Press START pad.
The ENTER, TIME indicators blink and “ : 0” is displayed.
The display will show what you pressed.
When you press the START pad, the TIME indicator starts
blinking and the display counts down the time remaining
in KITCHEN TIMER mode. When KITCHEN TIMER mode
ends, the oven will beep. The TIME indicator goes off
and COOK indicator starts blinking. The display counts
down the time remaining in MICROWAVE mode. When
MICROWAVE cook ends, you will hear 3 beeps.
How to Use to Set a Holding Time
1. Press TIME COOK pad to program
the desired cooking time for food to
be cooked.
2. Press KITCHEN TIMER pad.
3. Press the amount of time you want
the oven to hold.
4. Press START pad.
The ENTER, TIME indicators blink and “ : 0” is displayed.
The display will show what you pressed.
The COOK indicator starts blinking and the display
counts down the time remaining in MICROWAVE mode.
When the MICROWAVE cook ends, the oven will beep.
The COOK indicator goes off and TIME indicator starts
blinking. The display counts down the time remaining in
KITCHEN TIMER mode. When the KITCHEN TIMER mode
ends, you will hear 3 beeps.
NOTE: Your oven can be programmed for 99 minutes 99
seconds. (99:99)
Setting the Clock
When the oven is first plugged in, the display will show
" : 0" and a tone will sound. If the AC power ever goes off,
the display shows “ : 0” when the power comes back on.
1. Press the CLOCK pad.
This is a 12 hour clock system.
2. Press the CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by
pressing the number pads in
sequence.
4. Press the CLOCK pad.
The ENTER, TIME indicators blink and "12H" is displayed.
NOTE: This oven has multiple clock systems. If you want
a 12 hour clock system, omit this step.
The display stops blinking, and the colon starts blinking.
If you selected a 12 hour clock system, this digital clock
allows you to set from 1:00 to 12:59. If you selected a
24 hour clock system, this digital clock allows you to set
from 0:00 to 23:59.
NOTE:
1. If you attempt to enter an incorrect time, the time will
not be set and an error signal tone will sound. Press the
CLOCK pad and re-enter the time.
2. If you want to set power save mode, press and hold the
CLOCK pad for 3 seconds. For detailed information on
this feature, see Controls section, page 19.
Kitchen Timer Mode
Timer operates as a minute timer. Timer operates without
microwave energy.
How to Use as a Minute Timer
1. Press KITCHEN TIMER pad.
2. Press the amount of time you want
to count down.
3. Press START pad.
The ENTER, TIME indicators blink and “ : 0” is displayed.
The display will show what you pressed.
The TIME indicator starts blinking and the display counts
down the time remaining in KITCHEN TIMER mode. When
KITCHEN TIMER mode ends, you will hear 3 beeps.
NOTE: If you want to turn sound on or off, press and hold
KITCHEN TIMER pad for 3 seconds. For detailed information
on this feature, see Controls section, page 19.
1_TINSKB286MRR0_FULGOR _OTR_U&C_.indd 13 7/9/19 9:25 AM