Panasonic Lumix S5 Mirrorless Camera User Manual
Page 255
10. Recording Videos
255
[Time Code
Value]
[Reset]
Sets to 00:00:00:00 (hour: minute: second:
frame)
[Manual Input]
Manually input hour, minute, second and
frame.
[Current Time]
Sets hour, minute and second to current time
and sets frame to 00.
[Time Code
Mode]
[DF]
Drop Frame. The camera modifies the
difference between recorded time and time
code.
0
Seconds and frames are separated by “.”.
(Example: 00:00:00.00)
[NDF]
Non-Drop Frame. Records the time code
without drop frame.
0
Seconds and frames are separated by “:”.
(Example: 00:00:00:00)
0
When the following functions are being used, [Time Code Mode]
is fixed to [NDF]:
– [PAL] ([Switch NTSC/PAL])
– 24p [Rec Quality]
[HDMI Time
Code Output]
Time code information is added to images output via HDMI when
recording with the [
] mode.
0
The time code can also be output via HDMI by setting the mode
dial to [
] during playback. In the [Setup] ([IN/OUT]) menu,
set [HDMI Mode (Playback)] in [TV Connection] to [AUTO].
(
0
The device screen may go dark depending on the connected
device.