Panasonic Lumix S5 Mirrorless Camera - Manual (Page 197)

7. Metering/Exposure/ISO Sensitivity
197
0 In [M] mode, you can compensate the exposure by setting the ISO sensitivity
to [AUTO].
0 When the exposure compensation value falls below or exceeds n 3 EV, the
brightness of the recording screen will no longer change.
Press the shutter button halfway or use AE Lock to reflect the value on the
recording screen.
0 The set exposure compensation value is stored even if you turn off the
camera.
0 The standard value for standard exposure can be adjusted:
[
] ¨ [ ] ¨ [Exposure Offset Adjust.] ( l 371 )
0 You can set the exposure compensation value to be reset when the camera is
turned off:
[
] ¨ [ ] ¨ [Exposure Comp. Reset] ( l 372 )
0 You can change the operation of the [ ] button:
[ ] ¨ [ ] ¨ [WB/ISO/Expo. Button] ( l 379 )
0 Exposure Bracket can be set and flash output can be adjusted on the
exposure compensation screen:
[
] ¨ [ ] ¨ [Exposure Comp. Disp. Setting] ( l 379 )