Panasonic Lumix S5 Mirrorless Camera - Manual (Page 238)

9. Flash
238
™
Setting Items ([Wireless Setup])
0 To fire a test flash, press [DISP.].
¢ 1 This cannot be selected when [Wireless FP] is set.
¢ 2 This cannot be set when using the Flash (DMW-FL200L: optional).
[External
Flash] ¢ 1
[Firing
Mode]
[TTL]: The camera automatically sets the flash output.
[AUTO] ¢ 2 : Sets the flash output on the external flash
side.
[MANUAL]: Sets the flash output of the external flash
manually.
[OFF]: The external flash outputs only communication
light.
[Flash
Adjust.]
Adjusts the flash output of the external flash manually
when [Firing Mode] is set to [TTL].
[Manual
Flash
Adjust.]
Sets the flash output of the external flash when [Firing
Mode] is set to [MANUAL].
0 It can be set within the range of [1/1] (full flash output)
to [1/128] in 1/3 steps.
[A Group]/
[B Group]/
[C Group]
[Firing
Mode]
[TTL]: The camera automatically sets the flash output.
[AUTO] ¢ 1 : Sets the flash output on the wireless flash
side.
[MANUAL]: Sets the flash output of the wireless flash
manually.
[OFF]: The wireless flashes of the specified group will
not fire.
[Flash
Adjust.]
Adjusts the flash output of the wireless flash manually
when [Firing Mode] is set to [TTL].
[Manual
Flash
Adjust.]
Sets the flash output of the wireless flash when [Firing
Mode] is set to [MANUAL].
0 It can be set within the range of [1/1] (full flash output)
to [1/128] in 1/3 steps.