Panasonic Lumix S5 Mirrorless Camera - Manual (Page 254)

10. Recording Videos
254
When video is recorded in the MOV format, the hour, minute, seconds, and
number of frames information (time code) is recorded automatically.
The time code is used to synchronize multiple image and audio sources.
0 The time code is not recorded with video in the MP4 format.
Setting the Time Code
Sets the recording, display, and output of the time code.
1
Set [Rec. File Format] to
[MOV].
≥ ¨ [ ] ¨ [ ] ¨ [Rec. File
Format] ¨ [MOV]
2
Select [Time Code].
≥ ¨ [ ] ¨ [ ] ¨ [Time Code]
Time Code
[Time Code
Display]
Displays the time code on the recording screen/playback screen.
[Count Up]
[REC RUN]
Counts the time code only when recording
videos.
[FREE RUN]
Counts the time code also when video
recording is stopped and when the camera is
turned off.