Christie DWU1075-GS 10,875-Lumen WUXGA 1DLP Laser Phosphor Projector with BoldColor Technology (No Lens) - Manual (Page 72)

Troubleshooting
GS Series 1075 User Manual 72
020-001225-04 Rev. 1 (10-2018)
d. Click Show all devices .
e. Under the SP box, select Standard monitor types .
f. Under the Models box, select the appropriate resolution mode.
g. Verify that the resolution setting of the monitor display is lower than or equal to WUXGA
(1920 × 1200).
If using a Notebook:
1. On control panel or IR remote keypad, press AUTO .
2. Adjust resolution of the computer.
3. To send signal out from notebook to projector, press the keys listed below for your Notebook
manufacturer (for example, [Fn]+[F4]):
4. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment
including the projector.
Presentation is not displayed
The screen of the Notebook or PowerBook computer is not displaying your presentation.
Details
Some Notebook PCs may deactivate their own screens when a second display device is in use. Each
has a different method of reactivation.
Resolution
Refer to your computer manual for information on changing the method of reactivation.
Notebook brand Function keys
Acer [Fn]+[F5]
Asus [Fn]+[F8]
Dell [Fn]+[F8]
Gateway [Fn]+[F4]
IBM/Lenovo [Fn]+[F7]
HP/Compaq [ Fn]+[F4]
NEC [Fn]+[F3]
Toshiba [Fn]+[F5]
Mac Apple System Preference > Display > Arrangement > Mirror display
A35LS_UM_English.book Page 72 Thursday, October 25, 2018 5:15 PM