Installing the ceiling mount, Installing the projector in the rigging frame – Christie DWU1075-GS 10,875-Lumen WUXGA 1DLP Laser Phosphor Projector with BoldColor Technology (No Lens) User Manual
Page 28
Installation
GS Series 1075 User Manual
28
020-001225-04 Rev. 1 (10-2018)
Installing the ceiling mount
Mount the projector with a Christie-approved mount, using the four mounting points on the
underside of the projector.
See
1. Refer to the installation instructions and safety guidelines provided in the mount kit.
See
Installing the projector in the rigging frame
Install the projector in a Christie-approved rigging frame, using the four mounting points on the
underside of the projector.
See
Notice.
Failure to comply with the following may result in property damage.
• Refer to the UST lens instruction sheet for UST lens installation.
Warning! Failure to comply with the following could result in death or serious injury.
• The projector must be mounted securely according to the ceiling mount instructions.
• The warranty on this projector does not cover damage caused by the use of a non-recommended
ceiling mount kit or installation of the ceiling mount kit in an improper location.
Warning! Failure to comply with the following could result in death or serious injury.
• The warranty on this projector does not cover damage caused by the use of a non-recommended
rigging frame kit or installation of the ceiling mount kit in an improper location.
• The projector must be mounted securely according to rigging frame instructions.
A35LS_UM_English.book Page 28 Thursday, October 25, 2018 5:15 PM