Christie DWU1075-GS 10,875-Lumen WUXGA 1DLP Laser Phosphor Projector with BoldColor Technology (No Lens) User Manual
Page 40
Operation
GS Series 1075 User Manual
40
020-001225-04 Rev. 1 (10-2018)
Ceiling Mount
Turns the image upside down
for ceiling-mounted
projection.
—
Rear Projection
Reverse the image so you can
project from behind a
translucent screen.
—
Menu
Preferences
Sets the on-screen display
menu preferences, and the
password for the projector.
• Menu Horz Offset—Changes the horizontal position of the on-
screen display.
• Menu Vert Offset—Changes the vertical position of the on-
screen display.
• Show Messages—Displays status messages on the screen.
• Menu Transparency—Changes the on-screen display menu
background to be transparent.
As the value increases, more of the image behind the menu
is visible.
• Splash Screen Setup—Selects the splash screen.
• PIN Protect—Protects your projector with a password. Once
enabled, you must enter the password before you can
project an image.
• Change PIN—Allows you to change the password.
Power
Management
Determines the power modes
for the projector.
• Standby Mode—Determines if the projector is in standby
mode when connected to AC power.
• AC Power On—Automatically turns the projector on when
electrical power is connected.
• Auto Shutdown—Automatically turns the projector off after
no signals are detected for a preset number of minutes. If an
active signal is received before the projector powers down,
the image is displayed.
• Sleep Timer—Allows the projector to automatically power off
after it has been on for a specified amount of time (two, four,
or six hours).
• Cool Down—Configure the cool down time period (instantly
off, after 1 minute, or after 2 minutes).
High Altitude
Enables or disables high
altitude mode.
• On—Enables high altitude mode for altitudes >/= 2000 m.
The fan operates at high speed to ensure sufficient air flow
for high altitudes.
• Off—Disables high altitude mode. For altitudes below 2000
m.
IR Control
Enables or disables the IR
sensors.
• Top—Enables or disables the signal from the top IR sensor.
• Front—Enables or disables the signal from the front IR
sensor.
• HDBaseT—Enables or disables the signal from the HDBaseT
Box.
Menu item
Description
Options
A35LS_UM_English.book Page 40 Thursday, October 25, 2018 5:15 PM