Christie DWU1075-GS 10,875-Lumen WUXGA 1DLP Laser Phosphor Projector with BoldColor Technology (No Lens) - Manual (Page 21)

Installation
GS Series 1075 User Manual 21
020-001225-04 Rev. 1 (10-2018)
Turning the projector on
The projector cables must be securely connected before turning the power on.
1. Connect the projector power cables to AC power.
The Power button on the keypad is illuminated when the power cables are connected.
2. Ensure the lens has been installed in the projector.
3. Ensure that no one or no objects are in the beam path before turning on the projector.
4. To turn on the projector, on the IR remote keypad press or on the built-in keypad press .
The status LED is green with a slow blink.
5. To select an input source and turn it on, on the IR remote keypad select Input Key .
Available input sources are VGA, HDMI1, HDMI2, DVI, 3G-SDI, and HD-BaseT.
The projector detects the source you selected and displays the image.
Turning the projector off
Power off the projector in preparation for inspection or maintenance.
1. To turn the projector off, on the IR remote keypad or built-in keypad press .
A warning message appears on the displayed image.
Warning! Failure to comply with the following could result in death or serious injury.
• Do not look into the projector lens when the laser is on. The bright light may result in permanent
eye damage
The first time the projector is used, select the preferred language from the Main menu after the
startup screen is displayed.
1
2
Power on 1
SHUTTER
VGA
HDMI2 DVI-D
BNC
DP
3G-SDI HDBaseT
PRESENT.
CVBS
HDMI1
Power on
Input Key 2
A35LS_UM_English.book Page 21 Thursday, October 25, 2018 5:15 PM