Light intensity hazard distance – Christie DWU1075-GS 10,875-Lumen WUXGA 1DLP Laser Phosphor Projector with BoldColor Technology (No Lens) User Manual
Page 10

Safety
GS Series 1075 User Manual
10
020-001225-04 Rev. 1 (10-2018)
Light intensity hazard distance
This projector has been classified as CLASS 1 LASER PRODUCT - RISK GROUP 2 due to possible
hazardous optical and thermal radiation being emitted.
Warning!
Failure to comply with the following could result in serious injury.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted. RG2 IEC 62471-5:2014.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam within
the hazard distance or install the product at the height (greater than or equal to 3.0 m from the
floor to the beam) that prevents exposure of spectators' eyes within the hazard distance.
• EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.
• Do not stare into beam when the projector is on. The bright light may result in permanent eye
damage.
A35LS_UM_English.book Page 10 Thursday, October 25, 2018 5:15 PM