Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 96)

Printing From a Desired Starting Point
Print on sheets from a desired starting point as follows.
Setting Detect paper width to Disable
1. Tap paper settings display area on Home screen of operation panel.
Note
• If the Home screen does not appear, press the HOME button.
2. Tap Paper settings .
3. Tap Advanced .
4. Select Detect paper width and tap Disable .
Load paper in the desired position to start printing from
Follow these instructions to load paper at the desired starting position for printing when Detect paper
width is set to Disable .
1. If you did not send a print job in advance, a menu for selection of the type of paper is
displayed.
Tap media type loaded.
Note
• If a print job was received before the paper was fed, the media type and size specified by the
job are shown on the operation panel.
Go to step 2.
2. When " [Detect paper width] is disabled. Do you want to keep it disabled and
continue? " appears on operation panel, tap Keep it disabled and continue .
96