Custom size settings, Dialog box, Open the – Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit User Manual
Page 629: Borderless setting, Custom size settings dialog box (paper size), Borderless setting dialog box
Paper Source
Shows the source from which paper is supplied.
You may be able to switch the paper source with the printer driver.
Roll Paper
Feeds paper using roll paper.
Cut Sheet
Feeds paper using the cut paper.
Important
• Depending on the media type and size, the
Paper Source
settings that can be selected may differ.
Roll Width
Select the roll paper width.
Select the width that matches the width of the roll paper loaded in the printer. If you select
Custom Size
(XXXX)
, the
will be displayed, and the roll width can be specified to
any value.
Roll Paper Options
.
You can specify auto cut, banner printing, and other settings for printing on roll paper.
Size Options...
.
The
Paper Size Options
dialog box allows you to create and register any user-defined paper.
Custom Size Settings dialog box (Paper Size)
This dialog box allows you to specify the size (width and height) of the custom paper.
Paper Size
Specifies the
Width
and the
Height
of the custom paper. Measurement is shown according to the
units specified in
Units
.
Units
Select the unit for entering a user-defined paper size.
Borderless Setting dialog box
Adjust how much of the document extends off the paper during borderless printing, and configure the
three-sided borderless setting.
Amount of Extension
Adjusts how much of the document extends off the paper during borderless printing.
Moving the slider to the right increases the amount of extension and allows you to perform borderless
printing with no problems.
Moving the slider to the left reduces the amount of extension and expands the range of the document
to print.
629