Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit User Manual

Page 559

When the

Borderless Setting

dialog box is displayed, place a checkmark next to

Three-sided

Borderless

, and then click

Select a method for printing borderless

In the

Borderless Printing Method

tab, place a checkmark next to the

Print Image with Actual Size

option.
If the size of the document is different from the size of the paper you want to print on, select the paper
size you want to print on from

Printer Paper Size

Complete the setting process

Click

If you print now, the document will be printed without margins on three sides while retaining the same
document size.

Cut the right side of the paper

Cut the margin on the right side of the paper with scissors after printing.
To get the document to standard size, it is recommended to take measurements and cut in the correct
positions.

Important

• If you place a checkmark next to the

Borderless Printing

option, the

Page Layout

and

Print Centered

options in the

Layout

tab will be displayed in gray out and you will not be able to configure them.

• Depending on paper size, the length/width ratio of the paper may be different from that of the image,

making it impossible for the whole image to fit on the paper.
When this happens, crop the image with the application software to match paper size.

• When printing borderless, printing may stop abruptly and the paper will be cut causing a slight color

unevenness on the edges of the paper. If you require exceptionally high quality, in the

Roll Paper

Options

dialog box select

from the

Automatic Cutting

list. When you do so, the document will be

printed without the left margin. After the printed material has exited the printer and has been cut, cut the
upper, lower, and right edges with a pair of scissors.

• When printing borderless on paper with low ink-fixing properties, depending on frequency of use, the

cutter unit may come into contact with the paper surface scratching it and causing the paper to be
unevenly cut.

559