Switching the paper source to match the purpose – Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit User Manual
Page 582
Switching the Paper Source to Match the Purpose
This printer has two paper sources: Roll and Cut Sheet.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
1.
Open the
2.
Select the media type
Select the type of paper loaded in the printer from the
Media Type
list on the
Main
tab.
If
Auto (Use Printer Settings)
is selected, the paper configured in printer settings is printed.
3.
Select the paper source
From the
Paper Source
list on the
Page Setup
tab, select the paper source that matches your purpose.
Roll Paper
Feeds paper using roll paper.
Cut Sheet
Feeds paper using the cut paper.
Important
• The paper feed method will differ according to the paper settings.
4.
Complete the setup
Click
OK
.
When you execute print, the printer uses the specified paper source to print the data.
582