Eagle Electronics FishElite 642c - Manual (Page 20)

12
For example, instructions for navigating a trail would look like this:
1. From the Map Page, press MENU | MENU | ↓ to M
Y
T
RAILS
| ENT .
2. Press
↓ to Trail 1|
ENT |
→ to
N AVIGATE
| ENT .
3. You are asked to wait while it converts the trail into a route.
4. The wait message disappears and the unit begins showing
navigation information along the trail. Now, begin moving and
follow your unit's directions.
Translated into complete English, step 1 above would mean: "Start on
the Map Page. Press the Menu key twice. Next, repeatedly press (or
press and hold) the down arrow key to scroll down the menu and select
(highlight) the My Trails menu command. Finally, press the Enter key."
Step 2 would mean: "Press the down arrow key repeatedly to scroll to
the trail named Trail 1, and press Enter. Next, press the right arrow
key to highlight the Navigate command, then press Enter."