Eagle Electronics FishElite 642c User Manual
Page 119
111
Visual Trailing
1. On the Map Page, zoom (
ZIN
or
ZOUT
) so your trail is visible.
2. Begin moving and watch the Map Page. Walk or steer so your cur-
rent position arrow traces along the trail you have just made.
Tip:
Generally, when using this method, the smaller the zoom range, the
more accurately you will be able to steer along the trail.
Navigate a Trail
The following figures illustrate the menu sequence for navigating a trail.
1. Press
MENU
|
MENU
|
↓ to
M
Y
T
RAILS
|
ENT
.
2. Press
↓ to enter the Saved Trail list, then use ↑ ↓ to select the de-
sired Trail Name|
ENT
.
3. Press
↓ → to
N
AVIGATE
|
ENT
. Press
↓|
N
AVIGATE
|
ENT
.
The unit begins showing navigation information along the trail.
NOTE:
If you are already located at or near the beginning of your trail, the
arrival alarm will go off as soon as you hit Enter. Just press
EXIT
to
clear the alarm and proceed.
5. Now, begin moving and let your unit guide you.
6. When you reach your destination, be sure to cancel your navigation.
Press
MENU
|
MENU
|
↓ to
C
ANCEL
N
AVIGATION
|
ENT
. A confirmation message
will appear. Press
←|
ENT
.