Eagle Electronics FishElite 642c - Manual (Page 131)

123
Edit a Route Name
1. From the
N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Highlight Saved Route Name| ENT |
↑ to Name|
ENT .
3. Press
↑ ↓ to change the first character, then press → to move to the
next character and repeat until the name is correct. Press ENT . To re-
turn to the main page display press EXIT repeatedly.
Edit Route Waypoints
You can edit the route by adding and removing waypoints.
1. From the N
AVIGATION
P
AGE
, press MENU | ENT or from the M
AP
P
AGE
press MENU | MENU |
↓ to
R
OUTE
P
LANNING
| ENT .
2. Press
↓ to saved route name|
ENT |
↓ to Route Waypoints List. Use ↓ ↑
to select a waypoint and press ENT .
Edit Route Waypoints menu.
3. Use
↓ ↑ to select a command from the Edit Route Waypoints menu
and press ENT . Add From Map lets you insert a waypoint in the route.
Add Waypoint calls up the Waypoint List so you can insert a waypoint
from the list. Remove Waypoint will delete the waypoint from the route.
View Waypoint will show you where the waypoint is on the map.
NOTE:
When adding waypoints to a route, the inserted waypoints will ap-
pear in front of the waypoint you have selected. To insert waypoints
at the end of the route, select
(R
OUTE END
) before adding them.
Navigate a Route
1. From the
N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
,
press MENU | MENU |
↓ to
R
OUTE
P
LANNING
| ENT .