Eagle Electronics FishElite 642c - Manual (Page 174)

166
Find By Name menu (left). Find Exit menu with exit selected (right).
3. Once you have selected a highway name you can select an exit. Press
↓ to switch to the Exit List, then press ↓ ↑ until you highlight the exit,
then press
ENT.
4. In the Exit Information screen you have two choices. A. Press
ENT | ENT to navigate or go to the exit. B. Press ENT |
→|
ENT to find the
exit on the map.
Go To Exit option (left). Find On Map option (right).
Tip:
You can also look up some additional information on the Exit Serv-
ices located near this exit. Press
↓ to
S ERVICES
|
↓ ↑ to select Service
Name| ENT .