Eagle Electronics FishElite 642c - Manual (Page 159)

151
inserted into the unit. Navionics charts must be inserted into the
unit, then selected as a Map Choice option in the Map Data menu.
To display a Navionics chart:
1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)
2. From the Map Page, press MENU |
↓ to
M AP D ATA
| ENT |
↓ to
M AP
C
HOICE
| ENT . Select the Map Name, then press ENT | EXIT | EXIT .
South Chesapeake Navionics selected from Map Choice menu (right).
WARNING:
You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.
Pop-up Help
Help is available for most all menu items on this unit. By highlighting
a menu item and leaving it highlighted for a few seconds, a pop-up
message appears that describes the function of the menu item. This
feature is on by default.
To turn on Popup Help press MENU | MENU |
↓ to
S YSTEM S ETUP
| ENT |
↓
to P OPUP H ELP
. Press ENT to turn it on (check) or turn it off (uncheck).
Press EXIT repeatedly to get back to the main page display.