CHAUVET DJ GigBAR Move + ILS 5-in-1 Lighting System with Moving Heads, Pars, Derbys, Strobe, and Laser Effects - Manual (Page 30)

Page 24
Operation
GigBAR MOVE + ILS User Manual Rev. 3
Wireless Footswitch
The included wireless footswitch provides quick access to preset colors, color-change programs, and
sound-activation through the GigBAR MOVE + ILS microphone.
To use the footswitch:
Footswitch Operation
1. Connect the GigBAR MOVE + ILS to power. Turn the wireless
footswitch on.
2. Press on the GigBAR MOVE + ILS until SETUP shows
on the display, and press .
3. Use or to select FOOT then press .
4. Use or to select COMMON (to use the
GigBAR MOVE + ILS with any footswitch) or BIND (to pair a
footswitch to a specific GigBAR MOVE + ILS fixture).
5. Press .
6. Use the chart below to activate the desired function.
Pedal Action Functions
1
(Auto Programs)
Tap pedal to activate, then tap to
navigate to desired function
Auto programs
2
(Sound Mode)
Press and hold Sound-active programs
3
(Static Colors)
Tap
Cycles through colors
(Pars and Derby Lights ONLY)
4
(Blackout)
Tap Blackout
• The GigBAR MOVE + ILS footswitch will work properly in any mode, with a maximum
unobstructed distance of 100 ft (30.5 m).
• The settings will be saved if there is no operation after 2 seconds.
1 2 3 4