beautypg.com

CHAUVET DJ IRC-6 Infrared Remote Control 6 User Manual

Irc-6 (infrared remote control 6) operation, Automatic mode, Manual color control

background image


5200 N.W. 108th Ave., Sunrise, FL 33351 U.S.A. (800) 762-1084 – (954) 577-4455 FAX (954) 929-5560

www.chauvetlighting.com

IRC-6 (Infrared Remote Control 6) Operation

Note

: Make sure to point the IRC-6 directly at the receiver on the product.

Automatic Mode

Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1.

Press

on the IRC-6.

2.

Press

<+>

or

<–>

to choose between the different auto programs.

To adjust the speed of the automatic program:
1.

Press

on the IRC-6.

2.

Press

<%>

.

3.

Press

<+>

or

<–>

to either increase or decrease the speed of the program.

Sound-Active Mode

Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:

Press

on the IRC-6.

To adjust sound sensitivity in Sound-Active mode:
1.

Press

on the IRC-6.

2.

Press

<%>

.

3.

Press

<+>

or

<–>

to either increase or decrease sound sensitivity.

Manual Color Control

To choose a specific color with the IRC-6:
1.

Press

on the IRC-6.

2.

Press any number between

<0>

and

<9>

to choose your color.

To manually control the RGBWA+UV percentage:
1.

Press

on the IRC-6.

2.

Press

,

,

,

,

, or

(red, green, blue, white, amber, or ultraviolet) to choose your color.

Note:

To use the white, amber, or UV color options, the fixture must be capable of outputting that corresponding color

light.

3.

Press

<+>

or

<–>

to increase or decrease the percentage of each color.

Miscellaneous Operation

To adjust the strobe rate of the program:
1.

Press

on the IRC-6.

2.

Press

<+>

or

<–>

to increase or decrease the strobe rate.

3.

Press

again to turn off the strobe.

To fade the light output:

Press

on the IRC-6.

To black out the lights:

Press

on the IRC-6. This will turn off all the lights until the button is pressed again.

Note

: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a

button is pressed, try pressing

. You may have inadvertently activated Black Out.

These are basic instructions for the IRC-6. See your product's User Manual for more detailed operation.