CHAUVET DJ GigBAR Move + ILS 5-in-1 Lighting System with Moving Heads, Pars, Derbys, Strobe, and Laser Effects - Manual (Page 18)

Page 12
Operation
GigBAR MOVE + ILS User Manual Rev. 3
4. Operation
This product is not designed for continual use. Make sure there are regular breaks during operation to
maximize the life of the lasers. Always disconnect the GigBAR MOVE + ILS from power when not in use.
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview to see the button locations on the control panel.
Menu Map
Refer to the GigBAR MOVE + ILS product page on www.chauvetdj.com for the latest menu map.
Button Function
Selects an operation mode or backs out of the current menu option
Navigates upwards through the menu list or increases a selected numeric value
Navigates downwards through the menu list or decreases a selected numeric value
Activates a menu option or selected value
Mode Programming Levels Description
AUTO
Program
Mix 1–4 Sets auto mixed effects show
Spots 1 Selects moving heads auto show
Strobe 1 Selects strobe auto show
Laser 1 Selects laser auto show
Derby 1 Selects derby auto show
Par 1 Selects pars auto show
S+SP 1 Selects strobe and moving heads auto show
L+SP 1 Selects laser and moving heads auto show
LS 1 Selects laser and strobe auto show
D+SP 1 Selects derby and moving heads auto show
DS 1 Selects derby and strobe auto show
DL 1 Selects derby and laser auto show
P+SP 1 Selects pars and moving heads auto show
PS 1 Selects pars and strobe auto show
PL 1 Selects pars and laser auto show
PD 1 Selects pars and derby auto show
PS+SP 1 Selects pars, strobe, and moving heads auto show
PL+SP 1 Selects pars, laser, and moving heads auto show
PLS 1 Selects pars, laser, and strobe auto show
PD+SP 1 Selects pars, derby, and moving heads auto show
PDS 1 Selects pars, derby, and strobe auto show
PDL 1 Selects pars, derby, and laser auto show
DLS+SP 1 Selects derby, laser, strobe, and moving heads auto show
PLS+SP 1 Selects pars, laser, strobe, and moving heads auto show
PDS+SP 1 Selects pars, derby, strobe, and moving heads auto show
PDL+SP 1 Selects pars, derby, laser, and moving heads auto show
PDLS 1 Selects pars, derby, laser, and strobe auto show
Mode Snap/Fade Selects the transition between auto programs
Speed 0–99 Sets automatic program speed
Spots XY Speed 0–99 Adjusts the pan and tilt speed of the spots
Dimmer 0–255 Adjusts the dimmer
Strobe 0–20 Selects the strobe
Program Time 1–255 (seconds) Sets the program time