Epson MOVIEMATE 72 - Manual (Page 55)

Problem Solving
55
The button is flashing orange and green and both warning lights are
flashing red.
Epson MovieMate may have an internal error or cinema filter error. Wait a few minutes, then
press
. Unplug the power cable, then plug it in again and press . If the lights continue
to flash, unplug Epson MovieMate and contact Epson. See page 60.
Solving Epson MovieMate Operation
Problems
Epson MovieMate doesn’t turn on.
■ Make sure the power cord is securely attached at both ends. Try using a different power
outlet.
If the power cord has been damaged, turn off Epson MovieMate, disconnect the power
cord, and contact Epson. See page 60.
■ Make sure you pressed the button.
■ If the Image On light is flashing green, Epson MovieMate is warming up. Wait for the
picture to appear, which can take a few minutes.
■ Make sure the Child Lock is not set. See page 40.
Epson MovieMate turns itself off after a period of time.
The power turns off automatically when Epson MovieMate is idle for more than 30 minutes.
Press the
button to turn on Epson MovieMate. For instructions on changing the Sleep
setting, see page 40.
No picture appears on the screen.
■ Make sure Epson MovieMate is turned on (the light is green). If the Image On light
is flashing green, wait for Epson MovieMate to warm up.
■ Make sure the lens cover is open.
■ The image may be off the screen. Use the quick image adjustment dials to adjust its
position. See page 15.
■ Press the button on Epson MovieMate or on the remote control to make sure the
picture hasn’t been turned off temporarily.
■ Make sure the region code on the DVD is 1 .