Epson MOVIEMATE 72 - Manual (Page 43)

Doing More with Epson MovieMate
43
■ Default: Press and press to return all settings to their factory defaults (except
for the Disc Lock password and lamp hours).
■ Password: See page 39 for instructions on setting a password for locking DVDs.
■ Disc Lock: See page 39 for instructions on setting a password for locking DVDs.
5. To exit the Setup menu, press .
Adjusting Dolby Audio Settings
You can adjust settings for external equipment with a DTS/Dolby
Digital Decoder or DVDs recorded in Dolby Digital.
1. Press the button on the remote control. You see the Language
Setup Page :
2. Press to display the Audio Setup Page .
3. Press to highlight Digital Output or Night Mode , then press to select it. You
can select the following settings:
■ Digital Output : Change to Stream if you have connected a DTS/Dolby Digital
Decoder to the Audio-Out port.
■ Night Mode : Turn this setting on if you are watching a Dolby Digital DVD at low
volume.
4. Press to select the setting you want to change, then press to save it.
5. To exit the menu, press .
Setting Video Options
You can use the Visual Setup menu to adjust the signal format for external video equipment
and set other video options.
1. Press on the remote control. You see the Visual Setup menu.
2. Press to highlight Option , then press to select it.
3. Press until you see the option you want to set.