Panasonic TH-65CQ2U 65" 4K LED Commercial Display - Manual (Page 27)

27
English
■
To turn the power ON/OFF with the remote
control
To turn the power on
● When the
Indicator - red or orange), press
( )> then the picture will be displayed.
● Power Indicator: Green (Picture is displayed.)
To turn the power off (Standby condition)
● When the
Indicator - green), press ,
then the power will be turned off.
● Power Indicator: Red or orange (standby)
● The display turns off if the
is turned OFF ( ) while the unit is ON (picture is
displayed) or OFF (standby state).
Note
● After the power plug is disconnected, the power
indicator may remain lit for a while. This is not a
malfunction.
■
When the Unit is turned on for the first time
Following screen will be displayed.
Important:
Please read carefully.
This product’s power save mode has been set to enable (low power mode)
before shipping. (To reduce power consumption in standby mode)
During power standby at low power mode settings:
- LAN function cannot be used.
Are you sure you want to use low power mode?
Please select “YES“ if you agree with this condition.
Yes No
■
Power save mode
When this TV is turned on for the first time after being
shipped from the factory, the power save mode setting
screen will be displayed.
[Yes]: The TV᾿s consumption in standby mode is
reduced. However, the startup time from standby
mode becomes longer.
[No]: It is reduced that startup time from standby
mode. However, more power will be consumed in
standby mode.
Even after being set, you can change the “Power save
mode”. (see page 38)
Selecting the input signal
Select the signals input to the unit.
Press or .
Unit
INPUT ENTER MENU
+ -
Input
TV
HDMI1
HDMI2
HDMI3
PC
USB
[TV]: Antenna terminal
[HDMI1]: HDMI IN 1 terminal, HDMI input
[HDMI2]: HDMI IN 2 terminal, HDMI input
[HDMI3]: HDMI IN 3 terminal, HDMI input
[PC]: PC Input Terminal
[USB]: USB terminal, USB input