Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 726)

2.
Connect the power cord.
Connect the power cord to the USB power adapter and plug the other
end into a power outlet.
Charging begins, and the access lamp (1) is lit in green.
[ ] is displayed on the LCD panel.
When charging is finished, the access lamp turns off.
Supplying power
To power the camera without charging, set the camera power switch to an option other than
<
>. However, batteries are charged during auto power off.
[ ] is displayed on the LCD panel and screen while the camera is powered.
To change from powering the camera to charging, set the camera power switch to
<
>.
726