Printing, part removal, and bed preparation, Filament purging temperature, Part removal temperature – LulzBot TAZ Pro S 3D Printer User Manual
Page 40: Print bed preparation
38 |
LulzBot TAZ Pro S
Printing, Part Removal, and Bed Preparation
Filament
Purging
Temperature
(°C)
Part Removal
Temperature
(°C)
Print Bed Preparation
(See maintenance section
for more information)
ABS, HIPS
220
50
Isopropyl alcohol wipe
PLA
180
45
Isopropyl alcohol wipe
PETg
220
50
PVA glue stick
Bridge, PCTPE, Nylon 910
220
50
PVA glue stick
Ninjaflex, PolyFlex, TPU
200
Fully Cooled
Plain Glass or PVA glue stick
PA-CF
220
50
Isopropyl alcohol wipe
PolyCast
180
45
Isopropyl alcohol wipe
Your LulzBot TAZ Pro S Desktop 3D Printer is capable of printing advanced and expert level 1.75 mm filament
materials including: PLA, ABS, TPU, PC-ABS, Polycarbonate, PVA, and more. In addition, new materials are
frequently being added to our catalog, each thoroughly tested to develop the profiles included in Cura LulzBot
Edition. Shop our full range of 1.75 mm materials at
LulzBot.com/filament.