LulzBot TAZ Pro S 3D Printer - Manual (Page 18)

16 | LulzBot TAZ Pro S
4.2 Launch Cura LulzBot Edition. The Add Printer menu will automatically appear. Select LulzBot TAZ
Pro and M175 | 0.5mm , then click Add Printer . Existing users should select the Settings drop-down menu,
Printer , then Add Printer . On the next menu that appears, click Finish to complete the printer setup. Cura
LulzBot Edition is now ready for use with your LulzBot TAZ Pro S.
4.3 New firmware is continuously being developed to add new functionality and ensure your LulzBot TAZ
Pro S is creating the best quality prints. With the USB cable connected to your printer and a computer with
Cura LulzBot Edition installed, update the printer firmware by clicking the Settings drop-down menu and
selecting Printer, then Manage Printers . With LulzBot TAZ Pro/M175 | 0.5mm highlighted, click Upgrade
Firmware and follow the prompts to install the latest firmware.