LulzBot TAZ Pro S 3D Printer - Manual (Page 31)

LulzBot TAZ Pro S | 29
6
6
Starting Y
our First Prints
Starting Your First Prints
The X-Axis gantry may shift after your 3D printer is powered off. Every time the LulzBot TAZ Pro S powers on, it will
attempt to auto-home. Verify that the X-axis and print bed are clear before turning your machine on. Failure to do so
could result in damage to the printer or other equipment.
i
Your LulzBot TAZ Pro S can be operated without a USB tether to a computer by using the touchscreen LCD and
included flash drive. Once models are sliced and a .gcode file is saved they may also be saved to the included flash
drive by clicking Save to File in the lower right corner of Cura. Once saved, models may be printed directly from the
flash drive by plugging it into the slot located on the top of the touchscreen LCD, pressing the USB Drive button, and
selecting the model you would like to print.
i
If you need to make changes to your model, use the Prepare sidebar at the top left corner of Cura. Once changes are
made, Cura will automatically begin implementing the changes, also known as re-slicing.
i