LulzBot TAZ Pro S 3D Printer User Manual

Page 30

28 |

LulzBot TAZ Pro S

After removing filament, a small residual amount remains in the hot end that needs to be cleared out through the

process of purging as detailed above. This purging process helps to remove any residual material left in the hot end.

5.12

Once filament is

extruding, insert the filament

guide tube into the quick
connect on the top of the
extruder.

5.11

Select

Extruder 1

and press the

Load/Extrude - Continuous

button and let filament advance until it

extrudes smoothly and consistently as shown. Press the

Load/Extrude - Continuous

button again to stop

extruding.